Ducatisti Forum - View Single Post

**Masher** · 27 May 08, 06:33 PM

My ST2 was first registered June 2001, not sure if its a Showa or a Sachs fitted, how do I tell the difference?

I want to buy a C spanner to adjust the preload up a little, as its set at 2 notches (lugs notches or whatever) from the lowest setting. I am not of the lightest build and two up with luggage I suspect the bike is going to need all the help it can get.

My bike, bought second hand did not come with any underseat kit at all, any idea where I can purchase the C spanner (and maybe some of the other original tools)?

I look on Ebay from time to time but have not seen anything.

27 May 08, 06:33 PM	#1 (permalink)
Masher Ducati Legend Join Date: Mar 2008 Location: Near Chelmsford Posts: 1,085 Masher's Gallery Bike: 2001 ST2	C spanner for rear spring My ST2 was first registered June 2001, not sure if its a Showa or a Sachs fitted, how do I tell the difference? I want to buy a C spanner to adjust the preload up a little, as its set at 2 notches (lugs notches or whatever) from the lowest setting. I am not of the lightest build and two up with luggage I suspect the bike is going to need all the help it can get. My bike, bought second hand did not come with any underseat kit at all, any idea where I can purchase the C spanner (and maybe some of the other original tools)? I look on Ebay from time to time but have not seen anything. __________________ Masher 2001 ST2 in “RED” of course!