Ducatisti Forum - View Single Post

**Johnny** · 05 Jun 08, 07:50 PM

Template is the best way Dave but offering it up and marking the holes using a bradawl is also OK. I think it recommends using a little bit of sticky tape top and bottom. Take care with the drill bit sizes - I went up in 0.5 mm steps to make sure they were snug.

Oh and be careful as you ride one of those crotch rocket things, you will be watching the world through the last 10 mm of the visor so check the view but don’t put the top edge too close to the top of the visor as it won't seal shut.

05 Jun 08, 07:50 PM	#5 (permalink)
Johnny Moto GP God Join Date: Nov 2006 Location: Lincoln Posts: 832 Johnny's Gallery Bike: 2002 ST4S	Template is the best way Dave but offering it up and marking the holes using a bradawl is also OK. I think it recommends using a little bit of sticky tape top and bottom. Take care with the drill bit sizes - I went up in 0.5 mm steps to make sure they were snug. Oh and be careful as you ride one of those crotch rocket things, you will be watching the world through the last 10 mm of the visor so check the view but don’t put the top edge too close to the top of the visor as it won't seal shut. __________________ Best Regards John ...look, if you don't like it go !