Ducatisti Forum - View Single Post

**Dezmo888** · 17 Jun 08, 09:14 PM

I'm running a 2003 999s as a race bike with a Termi half system on it. Lately, I've been cracking the rear exhaust header right where the stub tube is welded onto the flange that attaches to the rear cylinder head.

I've carefully gone over the exhaust and subframe and all is seemingly OK.

I had two of these welded up by a local shop here in the states and got one race weekend out of one of them.

Anyone else run into this problem?

thx

Andrew

17 Jun 08, 09:14 PM	#1 (permalink)
Dezmo888 Newbie Join Date: Nov 2007 Location: Ohio, U.S.A. Posts: 19 Dezmo888's Gallery Bike: 2003 Ducati 999s	Rear Header Breakage I'm running a 2003 999s as a race bike with a Termi half system on it. Lately, I've been cracking the rear exhaust header right where the stub tube is welded onto the flange that attaches to the rear cylinder head. I've carefully gone over the exhaust and subframe and all is seemingly OK. I had two of these welded up by a local shop here in the states and got one race weekend out of one of them. Anyone else run into this problem? thx Andrew