Quote:
Originally Posted by BertAgain
.... whilst I'm getting grubby - does anyone know the proper torque setting for the 8 bolts holding the clutch basket on? The Haynes destruction manual doesn't say, and as they are steel into ali, too much force will mean a 'stripped thread' job.....
|
The 8 bolts holding the basket on pass through your new alloy basket and bolt up into the steel primary gear.
V Two of Australia make and sell an alloy replacement hub, this's also available through LT Snyder's Desmotimes.
These hubs do away with the rubber cush inside of the clutch hub, but this isn't really a problem.
Steve R