Ducatisti Forum - View Single Post - One squeak to another wheel bearing parts and reinstall

**stevel** · 12 Sep 08, 08:04 PM

Line up axle so that you can still access the compression adjuster screws
Tighten axle nut to 63 NM
Refit calipers, speedo drive etc
Loosely fit and nip up axle clamps
Bounce suspension a few times to ensure alignment
Tighten clamps gradually, a little at a time, to 19NM
howzat?

12 Sep 08, 08:04 PM	#5 (permalink)
stevel Carbon Connoisseur Join Date: Nov 2006 Location: north west Posts: 2,445 stevel's Gallery Bike: 2001 Ducati 996	Line up axle so that you can still access the compression adjuster screws Tighten axle nut to 63 NM Refit calipers, speedo drive etc Loosely fit and nip up axle clamps Bounce suspension a few times to ensure alignment Tighten clamps gradually, a little at a time, to 19NM howzat? __________________ Nothing but blues and Elvis, and somebody else's favourite songs.......