[testastretta998]

Ducati 998 EVO:

Once upon a time there was a Ducati 998 Strada Biposto, build 11 in 2001.
Bought in March 2003, got a 996R engine in fall 2007 and build the whole Bike from new since then. Finished the technical Side of the project now. Next the painter will do his work on the Project Bike.


Engine: Rebuild from zero to hero

100mm 996R Testastretta (Sand-cast cases)
-Crank & shafts with pistons lightened and balanced
-Lightend Flywheel (about400 Gr.)
-PISTAL High - Compression Pistons (13,1:1)
-Head Work with wider Inletports
-Overworked valveseats and bigger valves
-Overworked Gaschamber
-reworked PANKL H-Titannium shafts
-Ducati Corse 996 RS Ergal Shiftdrum with 996 RS Shiftforks
-Rework of the cooling circle, 998RS Water unions
-SFS Silicon Water hoses
-998RS Ergal timingbelt wheels, fully adjustable
998RS Water reservoir
-FEBUR 998RS Water Radiator with fan mountings
-MB MOTORSPORT 998RS Oil Radiator
-Ducati Corse F02 Carbon Underseat Crankcase Breather
-Ducati Corse reed valve with Carbon Membran
-EVR Racing Airbox mit First Attack Air Filter (stainless mesh)
-STM Racing Anschlussstutzen für Kurbelgehäuseentlüftung
-996RS Ducati Corse Carbon Batterytray
-Ducati Corse 4 Spring Slipper clutch
-998 RS Ducati Corse Clutch case
-998RS 60mm TERMIGNONI Titan Exhaust
-999R Carbon vented belt cover

Enginemanagement:
Ducati Corse ECU with Motty AFR Tuner and Data Logger plus LC1
Lambda controler from Innovativ Motorsports. Cylinderindependent

Closedloop Managing System with 2 wideband Lambda Sensors from Bosch
Motorsport.

The Bike:


-Frame resprayed in Ducati Rosso Corsa
-Marchesini Rearwheel 5,75 inch Magnesium Forged 10 Spoke Design
-Marchesini Frontwheel 3,5 Inch Magnesium Forged 10 Spoke Design
-ÖHLINS FG353p Gascharged Fork (D16RR) with Titanium frontaxl
-ÖHLINS 998RS Rear Damper, milled Aluminiumcase, milled magnesium link
-FEBUR Magnesium rear swingarm (19mm longer than stock) with Magnesium hub
-Every srew, nuts and bolt on the swingwarm in Titanium
-STM Corse Quick change sprocket with 520er DID ERV Racing chain.
-Ducati Corse Ergal Push rod
-Alu Monoposto Subframe
-Milled BREMBO RACING P32/34 front brake
-Milled 4 Pistons P4 22/22 rear brake
-955RS Rearaxl with 200mm full floating Racing Brakedisk, Titan Floater
-320er 748RS Front Brakedisks (6mm) full floating
-ÖHLINS steering damper
-Moto Corse Rearsets and Ducati Corse Carbon heatshield
-Milled Ergal lower triple

-Milled 16mm PVM Radial Master
-Milled 13mm Magura 190 Radial Clutch Master
-Milled Ducati Corse Clutch Slave cylinder
-Translogic Microdash
-Full MS Production Carbon Fairing with bigger Air scoops and Racing Ram Air Snorchels
-MS Production 996RS Superbike Carbon Fueltank 23,4 L
-Kellermann LED Blinkers (only rear)
-Every Bolt on the bike changed to Titan and V2A
-Black Suede Monoposto seat

Now I have done the first 1000KM this year on this bike. And after the painter had finished will put it on the dyno to see what`s the matter on rear wheel.


Some Pics:
























Hope you enjoy the Pics


Chris