|
ECU Issue!
I have just learned that if you want to put a used set of Termis from one bike to another the ecu is coded to a specific bike and can not be used on another bike!!! I have seen a lot of posts about fitting Termis, but this issue has never been mentioned! Apparently the ecu can not be reprogrammed! and in my case, taking a set of pipes and ecu from a M/strad 1000 to a M/strada 1100 can not be done? even if you remap the fuel using the std 1100 ecu, it may be that the engine will run too lean!
Any comments please?
Cheers,
__________________
Jim
|