Ducati 750 PASO Frame Compatibility?

**Imola Duke** · 17 Apr 07, 07:41 PM

Hi
Will a 750 ss carb belt engine fit into a 750 paso frame, Any mods needed ?
Thanks in advance
Steve

**Triple9** · 18 Apr 07, 07:28 PM

Well apart from the SS being air cooled and the Paso water cooled.

**Imola Duke** · 18 Apr 07, 09:59 PM

I'm aware of that mate, What i would like to know ! are the pantah based paso crankcase frame mount holes the same as the later 750 ss crankcases ?

**Triple9** · 19 Apr 07, 04:54 AM

I think they will be the same on the carbed bike.Not sure about the later i.e motor tho.
Pretty sure the i.e bikes have differant crankcases.

**Yorky** · 19 Apr 07, 03:24 PM

Hi, visit http://www.ducatipaso.org/ and look in the 750 Paso Discussion forum. There is a thread titled "1990 750 Sport" which might give you some useful info.

**Imola Duke** · 19 Apr 07, 08:54 PM

Cheers Lads

**paso** · 20 Apr 07, 07:48 PM

Quote:

Originally Posted by Triple9

Well apart from the SS being air cooled and the Paso water cooled.

THE 750 PASO WAS NOT WATER COOLED

**paso** · 20 Apr 07, 07:49 PM

Oh and there are a couple of 916 pasos around but off course the crancase is virtuallly the same 8)

**Imola Duke** · 22 Apr 07, 08:42 AM

Quote:

Originally Posted by Yorky

Hi, visit http://www.ducatipaso.org/ and look in the 750 Paso Discussion forum. There is a thread titled "1990 750 Sport" which might give you some useful info.

Thanks Yorky
Just the info i was after.
Cheers
Steve

**Triple9** · 23 Apr 07, 05:35 PM

Quote:

Originally Posted by paso

Quote:

Originally Posted by Triple9

Well apart from the SS being air cooled and the Paso water cooled.

THE 750 PASO WAS NOT WATER COOLED

I bow down to your superior knowledge on the subject.

906 was tho,wontit!? :P :wink:

**paso** · 23 May 07, 06:37 PM

oh yes 8)