Wanted - Marelli Digiplex Ignition Module

[DUNNEK65]

WANTED!! Hello to all members here on this forum i'm new to online forums I just hope I get some responce, Ok i'm after a Marelli Digiplex ignition module, for a Ducati Desmo Paso 906cc, Or if anyone can give me any tips on any other Ignition Modules which we can use on this model or can this sealed unit be fixed?
Cheers Kev - Cheshire

[paso]

I am lead to belive that the same unit is found on Lancia thema 16 valvers, Fiat croma 1600, and Moto guzzi nevada 750s Note i have not checked this out for my self. I do know the coils are Fiat

[Yorky]

Hiya Mate,

Are sure it is the Digiplex unit ? Cutting out and running on one cyclinder and then stopping? Leave it for 5 minutes and then re-starts ? Anyway, mine had similar problems. The usual cause is the soldering on the internal cicuit board goes brittle and fails. It is possible to remove the back and re-solder the dodgy areas. Also, the block connector is suspect as the wires and connections sometimes come adrift. It is cheaper to get another block connector and re-wire in to the new one.

Northwest Motorcycle Services are very useful and can be contacted on 01704 531616 or visit

CDI Unit - Honda, Yamaha, Suzuki, Ducati, Kawasaki, Voltage Regulator Rectifiers, Speed De-Restrictors, Alternators for motorcycles.

Hope this helps.

[DUNNEK65]

Originally Posted by paso

I am lead to belive that the same unit is found on Lancia thema 16 valvers, Fiat croma 1600, and Moto guzzi nevada 750s Note i have not checked this out for my self. I do know the coils are Fiat

Hi Paso, Thanks for the swift reply i'll l%k into what you've posted hopefully I can get this problem sorted asap, i'm missing out every day due to the Bike being out of action.

[DUNNEK65]

Hello Yorkey It's defiantly the Ignition Module ? I borrowed one from my friend who has the same bike as I have and it worked a dream