ST2 Stator Upgrade?

**mike shannon** · 18 Jan 08, 10:55 AM

hi
i e/mailed vin no ducati and asked if the stator upgrade was carried out on my st2 and they tell me no, they ask that i take the bike to a ducati dealer and have the work done
question has any one had this done on a st2 and what is the cost will i have to cover the labour and ducati cover the parts
one dealer in n.ireland/ one dealer in dublin/ one agent in belfast i think
mike shannon st2

**gjbird** · 18 Jan 08, 11:44 AM

Hi Mike,
I had this done on my ST2 which was outside the warrenty period. My alternator had fried which consequently fried the regulator. DucatiUK replaced everything and they covered all parts and labour - make sure they confirm this with you and that the Ducati dealer you use is aware of this before getting the work done.

Just so others are aware, this was a silent recall on the early ST2 model.

Once the upgrade is done you should be fine.
Gareth

**jlo** · 18 Jan 08, 02:36 PM

Mine was the same Mike, Stator upgrade (and a couple of other recall item) all done free of charge. No cost to me at all.

They should do all outstanding recalls. at the same time.

Jerry

**mike shannon** · 22 Jan 08, 07:09 PM

thank you
for the information as yet the local dealer has not got back to me they have been the ducati dealer in n.ireland for a few months and the guy who owns the bike shop has raced ducatis so i will keep you infirmed as to things
mike shannon st2

**mike shannon** · 01 Feb 08, 02:43 PM

hello
it is now 2 weeks but still no info from ducati/dealer as his info goes back to 2000 i think i will start the work as it may be weeks as this rate of things i have found all the part nos and cost is £175.00 if bought from ducati i think i will just start the woork as at this rate it may take weeks
mike shannon st2

**posrrr** · 23 Mar 08, 09:42 PM

Does anyone here know how the upgrade works? I just tried to use a newer side cover with 3-phase stator, but the crank is too long for that. Must be a new stator that mounts in the existing side cover. I had a spacer made to take up the space where the original rotor had been, and thought I was about finished. BIG SURPRISE to find it won't work that way.

Jack

**posrrr** · 23 Mar 08, 09:57 PM

Mike,
Could you post the part numbers? I'd like to see how they do this. I'm hoping it's just an adapter to mount the new-style stator in the old-style side cover. Is that how it's done?

Thanks much!

Jack in NYC, stuck completely...