 |
26 Aug 07, 07:25 PM
|
#1 (permalink) |
|
Knee Slider
Join Date: Jul 2006
Location: Lisburn
Posts: 195
|
Fitting a Ducati ST2 Reg/Rec?
hello
can any one help bought a new reg/rec RR51 type two yellow wires on the drawing it shows a white wire which they say is the charge wire now if i place a 12volt bulb in line with the + on the battery as per the drawing it will light and when i run the engine it will go out is the new rr51 reg/rec at fault or is this the way they are made so that if the light comes on when you are riding the bike it is to warn that the reg/rec is not working plus the reg/rec will not fit back on the bike as it is bigger than the old ducati one will have to find a place for it say in side the fork yokes mike shannon st2
__________________
mike shannon |
|
|
|
26 Aug 07, 09:47 PM
|
#2 (permalink) |
|
Knee Slider
Join Date: Mar 2007
Location: Chipping sodbury
Posts: 156
Bike: PASO 906
|
I fitted one to my paso906 last week i just ran the white wire into the feed to the original charge light on the bike on paso its a blue wire. Worked a treat. Do you have access to an st2 wiring diagram ? But surely your set up is working ok? light goes out when charging comes on when not ?
__________________
If you fall over Ten times get up Eleven |
|
|
|
reg/rec st2 ducati
|
27 Aug 07, 12:48 PM
|
#4 (permalink) | |
|
Titanium Titan
Join Date: Aug 2006
Location: Sleepy Leafy South Birmingham
Posts: 4,368
Bike: 2001 ST4
|
Quote:
Hope this helps, Mark.
__________________
eDUCATIon |
|
|
|
|
|
27 Aug 07, 06:10 PM
|
#5 (permalink) |
|
Knee Slider
Join Date: Jul 2006
Location: Lisburn
Posts: 195
|
reg/rec
hello mark
i have just paid a vist to a sheet metal shop and they gave me a 3mm alum 100mmx100mm to fit in under the head lamp or it would req me to cut out a section on the faring ,ref the white wire it will go out when the bike is running but i will have to re wire it as if you follow the drawing you get with the rr51 it is rr51/ bulb /battery which means it is on when you turn off the bike mike shannon
__________________
mike shannon |
|
|
|
|
25 Sep 07, 06:01 PM
|
#7 (permalink) |
|
Carbon Connoisseur
Join Date: Sep 2006
Location: Cornwall
Posts: 2,155
Bike: Ducati's
|
Hi,
I use Electrex RR51's on my Ducatis and find them bomb proof........ HOWEVER I DON'T THINK THE'RE THE RIGHT FITMENT FOR THE ST2! Steve
__________________
Always room for one more Duke |
|
|
|
|
25 Sep 07, 06:13 PM
|
#8 (permalink) | |
|
Titanium Titan
Join Date: Aug 2006
Location: Sleepy Leafy South Birmingham
Posts: 4,368
Bike: 2001 ST4
|
Quote:
|
|
|
|
|
|
26 Sep 07, 08:35 PM
|
#9 (permalink) |
|
Knee Slider
Join Date: Jun 2007
Location: Lowestoft-Suffolk
Posts: 111
|
Out of stock and no idea if they will be returning into stock for the foreseeable future I was told in an email.
__________________
Monster M600 Dark (SOLD!) ST2 Fila Toseland WSB Rep (Awaiting reg/rec) :( |
|
|
|
|
04 Apr 08, 11:07 AM
|
#10 (permalink) |
|
Newbie
Join Date: Apr 2008
Posts: 7
Bike: 1998 ST2
|
Fit like from bonny Aberdeenshire! New to the forum and new to Ducatis. All this talk of cooling for the reg/rec has got me worried about the location the previous owner chose to mount the replacement (off a 900SS I think he said) on my ST2. It's on the frame, below the saddle and behind the right hand side rear panel. Can I expect to have to fit a replacement soon or is this reg/rec immune to overheating? It's strange, as the guy obviously went to some trouble to mount it in that position, extending the wires and everything, but I can't see that there will be much in the way of airflow. Any advice welcome.
Ted |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
All times are GMT. The time now is 02:58 AM.
| Site Sponsors | |||||||||||
|
